Category: News

Wheels and the old dilemma returns!

Kevin came over today and we fitted the wheels he has built up. The front has the correct Eclipse hub and the rear has a copy hub but with a mainly original clutch. The cover and most parts are HD but the missing parts came from Competition. The rims are from Al McPherson and we have used ‘mock up’ spokes and nipples to get the lengths and offsets correct. They will be rebuilt again in due course.

img_5336img_5337

The dilemma is the old one though. Just for fun after lunch we put on the old gas tank,  the handlebars and we balanced the old seat on the frame…… So now I’m wondering (again) whether this should be the ‘old parts’ bike or if I should use the restored parts on this build and keep searching for more old parts and put them on the belt drive.  I just don’t want to repaint this old frame as part of the restoration.

img_5338 img_5339

Rear fender and tool box

29.12.2016

First off today was to fit an original rear stand in place of the repop version that came with the frame; easy fit, no problems.

img_5313img_5312

The original rear fender went straight on without any effort and I will address the paint at a later date. It’s an old repaint but doesn’t match the rest of the bike. I’m using new stays from Jethro Smith and he also sent me the correct 1/4″ 24 tpi die to thread the ends.

img_5311   img_5310

The oil tank/tool box also went on without problems. It is secured by way of a repop top mount and a bolt through the back of the box and through the fender. There is also a bottom mount that fits under the frame but the one I have doesn’t work: I’ll make one. All in all an easy day, it will make up for the stressful ones which WILL follow.

img_5320 img_5321 img_5322 img_5323

12 twin build starts

I now have enough parts to start the build of the chain drive twin. I also have a 1912 8D project and several more parts which could be used on both the 8E (chain) and 8D (belt). I will probably build one bike as a dirty scruffy original and the other as a restored, painted and plated bike but still to be ridden. It will depend on what parts I can find. There is also a 1914 two speed sitting on the shelf and other assorted projects on the go.

The first issue was with the frame; I couldn’t get the seat post out, it was fixed solid. I had to the cut the back of the seat tube and then weld a rod and slide hammer the post out. Then re-weld the tube and re-fit another (original) seat post. You can’t see the repair when the toolbox is installed.

img_5213 img_5314

Next was the silencer. I built up the re-pop version on the bike as a guide to check the fit. Then I had to make the original one fit (usually it’s the other way around). First I had to machine the baffle so it would fit into the rear outlet and then on assembly discovered it was too long. So 12 mm off the baffle and then re-round the outer cover to fit both end pieces.

img_5297img_5300img_5302img_5303img_5304img_5305 img_5306 img_5308

The next job is to tweek the flange on the front header pipe and then fit some olives inside both unions. Then fit the cut out and the exhaust should be done.

1914 Two Speed Twin

This is the next project. It might have to sit on the shelf (literally) for a while but you have to buy these things when they turn up, not wait until you need one (need?).

This was always my ‘holy grail’ model. I came close to a couple but could never close a deal. With two gears and a neutral, foot-boards and a proper rear brake it might make a good regular rider. They are a bulkier bike than the pre ’13s and lack some of the charm of the earlier models but they are a lot easier to ride.

  

64 Duo for sale

This nice 64 Duo-Glide is for sale. I got her just week, put a new battery in, changed the fluids, cleaned the float bowl and she started first kick, VERY first kick after priming. She was in storage for the last six or so years and has a surface covering of dust rust but that will come off easily enough. After that I adjusted the brakes, fluid in the rear, and she rides really well but of course she will need a thorough going over before she hits the road.

She is a very correct bike with a few period accessories and a nice paint job. Like most standard Harleys; she is the same but a bit different.

SOLD

 

Chicano Chop

So after buying the green chopper I started looking for a motor. I found one, started to negotiate but ended up buying the complete bike. But she is cool and doesn’t deserve to be broken.

She had been in storage for some years now and was missing leads, plugs, and the twist grip. We put those parts on, a new battery, oils and gas, then she fired up after about a dozen kicks. Even the lights still work! There is no clutch control, the front brake cable has been unattached and some other small stuff.

She’s a tough bike, really strong FLH motor, belt primary and I love the S&S carb with the Goodson cover. Now I have to decide; do I rob the motor for the green bike, start changing the parts to update her and get really Mexican and keep her or get her rolling and make another quick sale. Decisions. SOLD

 

Another 8A for sale

This lovely little 8A (on the left) will be for sale at Veterama later this week. It is priced at €52k which is just under $60k US. The one on eBay last week (on the right) reached $45k but not the seller’s reserve!

1912-8a-1 s-l1600-1

Start your own build

There is a nice little 1912 single motor for sale on eBay currently at just $8k. All the other parts you would need to finish the bike are available as reproduction parts and in time you could find several original parts to add to the bikes credibility.

http://www.ebay.com/itm/1912-Harley-Davidson-Single-Cylinder-Belt-Drive-Motor-/252561037164?hash=item3acdcf976c:g:FmgAAOSwTA9X6-uF&vxp=mtr

 

1912a 1912b

There is also a 1912 single cylinder complete bike listed on eBay. It has been for sale for a long time now but I guess the sellers reserve price has never been reached. It’s up to over $40k already, so the single motor, complete with carb and magneto looks like good value.

http://www.ebay.com/itm/Harley-Davidson-Other-/191981270997?forcerrptr=true&hash=item2cb2f9b7d5:g:HIYAAOSwLnBX6nLa&item=191981270997

s-l1600-3s-l1600-1

Davenport

Last week was Davenport again. We flew over, went to the HD Museum and Anamosa again on the way to the event. I found a pair of 1912 bars and a same period front wheel. A few hard to find small pieces as well but the best part was meeting up with all the guys who make the difficult parts.

There was a OK ish 12 single and reasonably priced at $47.5k and a few of the Cannonball bikes that were setting off after the show. The dirt track racing in the evening was better than my photographs!

img_4805 img_4818

1 … 8 9 10 11 12 … 18