Anatomy of a Knucklehead
I was having a browse on the internet yesterday and came across this article on the official Harley Davidson website….
https://www.harley-davidson.com/eu/en/owners/hog/HOG-article/custom-knucklehead.html
Month: December 2019
Footboards on the bike.
10F footboard and pedals
I have been through the footboards and controls. All threads are good but I had to change two of the board mounts. The grease nipple is wrong and the rubber mats are too short but ready to go.
Starting the build on the 10F
The build has started on the 10F now. The frame needed the usual tidying up of the threads and the seat post needed to be cut free, the post cut and then re-welded (they all do) and that was about it.
The frame, forks and fenders are all original as is the rear stand and the front hub. The replacement seat post is old repop I think. The front wheel is a mock up with British spokes, original rebuilt hub and a repop rim and the fork rockers, seat bar and oil tank are all repop. I have some original rockers I will add later.